TECHTONGDA Salt Spray Test Chamber 47L Salt Water Spray Precision Measuring Chamber 17.7*13.8*11.8"

<br>✔Description: <br>Salt water spray testing machine is for various materials surface treatment, including coating, electroplating, organic and inorganic skin film, anodic treatment, anti-rust oil and other anti-corrosion treatment to test its corrosion resistance, so as to establish the quality of products. <br> <br> <br>✔All materials: <br>Laboratory of imported PVC PVC board, thickness of 5 mm, durable temperature at 85 ℃. <br>The seal cover of the laboratory is made of imported European acrylic plate with a thickness of 5mm. <br>The refill bottle adopts hidden type water level gauge, which is easy to clean and not easy to break. <br>The pressure air tank is sus304 stainless steel and high pressure resistant tank with excellent thermal insulation performance. <br>The basket of the laboratory adopts a plane dividing frame, which can be adjusted at any Angle. The fog falling on all sides and being affected by fog are exactly the same, and the number of test pieces is large. <br> <br> <br>✔Parameters: <br>Voltage: 110V <br>Material: PVC (lid) + ABS (box) <br>Laboratory volume: 47L <br>Inner size: 450*350*300mm <br>Outer size: 900*450*600mm <br>Technical basis: Set according to JIS /ASTM/CNS/GB standard <br> <br> <br>✔Control system: <br>Laboratory temperature control: to control the temperature of the laboratory, according to the standard temperature, brine test 35 ℃, corrosion resistance test 50 ℃. <br>Saturated air barrel temperature controller: control saturated air barrel temperature, temperature setting, brine test 47 ℃, corrosion resistance test 63 ℃. <br>Chronograph: adjustable 0.1s-999.9hr can set the test time at will, and finally stop automatically. <br>Heating tank temperature controller: control the water temperature of the heating tank, this controller is to cooperate with the laboratory temperature to control the environmental temperature change around the testing machine is too large, but also to cooperate with the adjustment, its setting mode is located in the control box. <br>Brine spray test: laboratory temperature controller set 35 ℃, saturated air barrel temperature controller set 47 ℃ (40 ℃-50 ℃) <br>Saturated air bucket safety temperature controller: saturated air bucket temperature control, a safety protection device, the temperature safety setting value is 5 ℃ higher than the actual temperature, (located in the control box) <br> <br> <br>✔Item included：239280 <br>TECHTONGDA Salt Spray Test Chamber 47L Salt Water Spray Precision Measuring Chamber 17.7*13.8*11.8"

• 【Homogeneous Spray, Meeting Many Test Criteria】Adopting bernoute principle to absorb brine and then atomize, the degree of atomization is even, no blocking phenomenon of crystallization, can ensure the standard of continuous test.
• 【Stable Heating】Adopt the direct heating method, the heating speed is fast to reduce the standby time, when the temperature reaches ON. OFF switching, accurate temperature, less power consumption.(heating tube is made of high corrosion resistance heating system: titanium tube).
• 【Automatic Defogging】The machine has automatic defogging function，It also has automatic water replenishment and high temperature protection functions. Safe and convenient to use.
• 【With Detection System】 Intelligent control panel with digital display. Each function has its own switch. When a fault occurs, the corresponding indicator will light up.
• 【Visible Viewing Window】The salt water tank USES the hidden attached water level observation window; The cover of the box is transparent plexiglass, with good insulation and intuitive spray status.
• 【Scope of Application】This product is used to test the corrosion resistance of the electrodeposited coating of many kinds of metallic materials.Use the salt spray test machine to spray the Sodium Chloride Solution to the surface of electric coating to achieve the purpose of detection.